Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 81 (kliknij aby zobaczyć)
Reinstalling the Encoder Strip
1 Ensure that the encoder strip is oriented with the transparent area down. 2 Feed the strip through the apertures in the cartridge carriage assembly.
3 Use a washer and screw to attach the encoder strip to the bracket on the left side of the plotter. Tx 10
4 Use a washer and screw to attach the encoder strip to the bracket on the right side of the plotter.
5,5 mm
Ensure that the metallic tensioner is correctly positioned in the holder.
